Solar Energy
Light Pole
Plasgain’s Solar Energy Light Pole system combines a structurally tested Plaspole™ composite pole with high-performance solar lighting components, delivering a sustainable, grid-free commercial lighting solution.
5m & 6m Pole Height Options
20W – 100W LED Compatibility
Lithium Battery Compatible (Li-ion or LiFePO4)
80W+ Solar Panel Capacity
IP65 Minimum Weather Protection
Up to IK10 Vandal Resistance
VESI & AS/NZS 1170.2 Structural Tested
Get Your Price Quote
Each Solar Energy Light Pole system includes:
Plaspole™ composite pole with aluminium outer skin and recycled polymer core
Compatible commercial-grade LED luminaire
High-efficiency solar panel
Lithium battery system
Intelligent charge controller with dusk-to-dawn automation
Hot dipped galvanised in-ground or above-ground base
Mounting hardware and rag bolt assembly
Internal cable routing conduit
Technical Specifications
Residential Light Poles
- LED Wattage Range
20W – 100W solar compatible luminaires - Lumen Output
Dependent on luminaire selection and lighting design - Solar Panel Wattage
Typically 80W and above depending on application - Battery Capacity
Lithium battery systems designed for commercial autonomy requirements - Charging Time
Approx. 6–8 hours peak sunlight (site dependent)
- Runtime
12+ hours per night depending on lighting mode - Nights of Autonomy
Up to 7 nights continual lighting (luminaire dependent) - IP Rating
IP65 minimum - IK Rating
Up to IK10 vandal resistant - Wind Rating
Tested in line with VESI and AS/NZS 1170.2 load requirements
- Pole Material
Aluminium outer skin with recycled polypropylene structural core - Coating Type
UV and weather-resistant aluminium, paintable finish - Mounting Height
5m and 6m configurations - Operating Temperature
Designed for Australian environmental conditions - Structural Testing Summary
Independent structural testing confirms compliance under:- Permanent load
- Serviceability load
- Ultimate load
All tested poles sustained applied loads without structural failure in accordance with VESI and Australian Standards
Key Features
No Trenching Required
- Eliminates underground cabling and grid connection costs.
Easy Installation
- Hot dipped galvanised base compliant with VESI standards ensures secure foundation.
Automatic Dusk to Dawn Operation
- Integrated controller system enables fully automatic lighting.
Motion Sensor Options
- Available with selected luminaires for adaptive lighting modes.
Adjustable Solar Panel Configuration
- Optimised positioning for maximum energy capture.
Powder Coated & UV Resistant Finish
- Aluminium outer skin designed to resist corrosion and weather exposure.
100 Percent Recycled Structural Core
- Each pole consumes approximately 40kg of post consumer plastic waste.
Key Applications & Use Cases
Designed for commercial and infrastructure projects including:
Roads and streets
Car parks
Pathways and shared zones
Parks and public spaces
Industrial facilities
Regional and remote infrastructure
Why Choose Plasgain?
Our light poles are built to meet engineering standards and environemnts across Australia
1000+
Poles Installed
25+
Poles Installed
Solar Energy Light Pole vs Traditional Grid Lighting
| Feature | Solar Energy Light Pole | Traditional Steel Pole |
|---|---|---|
| Installation Cost | Lower - No trenching | Higher - Cabling required |
| Running Cost | Zero electricity cost | Ongoing energy charges |
| Trenching Required | No | Yes |
| Maintenance | Minimal | Electrical infrastructure servicing |
| Carbon Footprint | Approx. 246 kg CO2e | Approx. 380 kg CO2e |
Frequent Asked Questions
Testimonials
Plasgain is proud to have serviced over 60 different compaines from around Victoria and Australia.
"Beyond the product itself, the support and service provided by Plasgian over the years has been nothing short of outstanding. Their team has consistently demonstrated a commitment to customer satisfaction"
OPT HIRE
★★★★★
""From product quality to environmental performance, Plasgain sets a high standard. We value their consistent service and forward-thinking approach."
CENTRAL POWER
★★★★★
"Working with the team at Plasgain on the Zorro 2 Plasgain project was a seamless experience from start to finish. As contractors, they demonstrated exceptional professionalism and efficiency throughout the project lifecycle."
VERCON CONSTRUCTION GROUP
★★★★★
"Lead times are transparent, supply is dependable, and their proactive communication supports program certainty across complex delivery environments. Plasgain is a trusted supply partner that consistently delivers both product and service reliability."
HGC COMMERCIAL
★★★★★
"Their team understands the merchant channel, supports us with practical solutions, and genuinely works with us to grow the category. Plasgain is a supplier we trust and are happy to recommend to our customers."
SAMIOS PLUMBING SUPPLIES
★★★★★
"For large contracts or government projects, we appreciate your help to confirm technical specs and third-party testing/certifications where possible before purchasing. We highly commend you for following: High product quality, excellent customer service, responsive communication.""
AMTEK SOLUTIONS
★★★★★
Over 60+ compaines serviced and worked with across Australia
Get a Price Quote
Share with us your project details and how we could help. All information provided is confidential.